Home/Syringes/DGA Glass Syringe/Transformer Oil Sampling Syringes/20ml Truth DGA Glass Syringes for Transformer Oil Sampling (Pack of 1)

20ml Truth DGA Glass Syringes for Transformer Oil Sampling (Pack of 1)


20ml TRÜTH DGA Glass Syringes For Transformer Oil Sampling (Part No. : 09-10-02-07)

TRÜTH DGA Glass Syringes are used to obtain samples of mineral oil in a transformer to test the quality of the oil. Transformer mineral oil is used to cool the transformer and also provides electrical insulation.

TRÜTH DGA Glass Syringes for Transformer Oil Sampling as per IEC-60567, IEC-60475 & ASTM – D923

$ 48

20ml TRÜTH DGA Glass Syringes For Transformer Oil Sampling (Part No. : 09-10-02-07)

TRÜTH DGA Glass Syringes are used to obtain samples of mineral oil in a transformer to test the quality of the oil. Transformer mineral oil is used to cool the transformer and also provides electrical insulation.

TRÜTH DGA Glass Syringes for Transformer Oil Sampling as per IEC-60567, IEC-60475 & ASTM – D923

Pack Size : 1pcs

Features

  • The Syringe is made from heat resistant borosilicate glass
  • They confirm to ISO 594/1; 595/2
  • The material and construction is resistant to breakage from shock and sudden temperature changes
  • The Syringe cylinder plunger fit is leak proof and meets the requirements of Federal Specification GG-S-92lb/A-A-54840/ISO 7886 for any leakage or backflow & for smooth plunger movement.
  • In compliance with IEC-60567, IEC-60475 & ASTM – D923
  • We supply in Private label
  • The syringes are available in universal fit or custom fit design. The custom fit syringes are uniquely numbered for matching.
  • The fitting is made from chrome-plated brass and fits all female luer lock fittings.
  • The syringes are clearly marked with appropriate graduations.
  • The graduations and logos are permanently fused onto the glass. This accounts for lifetime accuracy and legibility.
  • The syringe plunger is coloured bevelled rimed to facilitate dosage measurement
  • The syringe reinforced flanges which are flat on two sides prevents the syringe from rolling.

Overview

20ml TRÜTH DGA Glass Syringes For Transformer Oil Sampling

The 20ml TRÜTH DGA Glass Syringes are used to obtain samples of mineral oil in a transformer to test the quality of the oil. Transformer mineral oil is used to cool the transformer and also provides electrical insulation. When this mineral oil is subjected to high thermal and electrical stresses, it decomposes and gases are generated. Different gases are generated from different types of faults, and the chemical analysis of these gases (Dissolved Gas Analysis) provides diagnostic information about the condition of the transformer. The process of obtaining samples takes place from time to time on regular intervals. These products are not intended for human use.

DGA syringes are custom fit (matched numbered) to create a tight fit between the barrel and plunger. The barrels are frosted in order to avoid pressure and vacuum build-up in the syringe and breakage during handling. In addition to improving the fluency of the barrel while pulling the oil sample out of the transformer, it also avoids the formation of bubbles once the sample is collected as the plunger is allowed to move which prevents air ingress in case of volume variations. These features are prescribed in IEC 60475.

The syringe is also available with respective accessories including TOSIN 3way stock cock, TOSIN Tubing with connector, TOSIN Padded carrying case.

Tests Include:

(1) Dissolved Gas Analysis
(2) Water
(3) Dielectric dissipation factor
(4) Particles
(5) Breakdown voltage
(6) Other chemicals & physical tests

Reviews

There are no reviews yet.

Be the first to review “20ml Truth DGA Glass Syringes for Transformer Oil Sampling (Pack of 1)”

Specification

Size 20ML
Cat No 09-10-02-07
Termination Metal Luer Lock Tip
Graduation Major 5.0ml
Graduation Minor 1ml
Graduation Type Permanently fused
Autoclavable Yes
Liquid Path Borosilicate Glass, Nickel Chrome Plated Brass
Certification Yes
Volume Variation ±4%
Sterility Non Sterile
Piston Outside Diameter 20.10mm ±2mm
Barrel Out Side Diameter 32.75mm ±0.75mm
Overall Length 150.00mm ±1.00mm
Graduation Increment 1.0ml

You may also like…

Categories

Termination

Sizes

Graduation

Price

Recent Tweets

Newsletter

Sign-up to get the latest news and update information. Don't worry, we won't send spam!

[contact-form-7 404 "Not Found"]